Cozy Knit Bear | 217 mm 3MF Digital Download

Cozy Knit Bear brings the look of a chunky knit sweater to a seated teddy. A braided cable runs down the chest, with finer knit texture on the face, ears, and paws. The classroom mockup shows a hot-pink body, a gold bow, and black face inserts.

Digital download only. You receive the Bambu Studio 3MF project for this bear design. Supply your own printer, filament, and LED candle. The photo with both bears shows the two designs side by side.

What you’ll print

1. One-piece teddy bear body
2. Bow with an open collar
3. Removable top tray for a flameless LED candle
4. Two eye inserts and one nose insert

Each group of parts has its own build plate, so you can choose a different filament color for the body, bow, tray, and face.

Size and saved print settings

The assembled bear is approximately 217 mm tall with the tray fitted, before adding the LED candle. The body is approximately 175.6 × 141.9 mm (width × depth) and 208 mm tall. Allow additional bed space for the brim.

Open the 3MF as a project in Bambu Studio to load the tested Bambu Lab P2S settings. The bear body uses PLA, a 0.4 mm nozzle, 0.20 mm layers, 3 walls, 10% grid infill, automatic tree supports, and a 5 mm outer brim. Review the plate and filament settings before slicing. Use a printer with enough space for the body at the supplied size.

Assembly

Let the printed parts cool and remove the brim and supports. Check the fit of the bow and collar and the three face inserts before securing them. Set the removable tray into the opening at the top of the bear.

LED candle care

Use a battery-operated flameless LED candle only. Keep the printed bear and tray away from real flames, heated candles, candle warmers, and other heat sources. The tray has a flat seating area about 72 mm across and a rim about 6 mm above the floor. Measure the widest part of your LED candle’s base and check that it sits flat and stable on the tray. Switch it off and remove it before cleaning. Wipe the printed parts with a soft, dry cloth and follow the candle maker’s battery and care instructions.

Digital file terms

Do not sell or share the digital files. The 3MF and its contents are for the original purchaser only. Selling, uploading, sharing, or redistributing the digital files is prohibited. You may sell finished physical prints made from these files. All digital sales are final.

3D Trendsetters — Layered to Perfection.